ThinOX allows to install and use the Elo Touch Screen drivers.
¶ Install Elo Touch Screen Driver
Download from the Praim website (you need to be registered) the Addon file that contains the Elo Touch Driver related to the model of the thin client.
My Praim Download
After you log in to the Praim website you will have a menu under your username called "My Praim". Click on it.In the left part of the page, you see a menu, select the "Download" entry. After that select the "ADD-ON" section.
Here you can download the addon for the ThinOX device.
The name is "ELOtouch x.y AddOn for ThinOX" where x.y depends on the version of the addon.
The Elo Touch addon is installable on any device with ThinOX 10.2.x or greater version and is compatible with all the Praim thin client models.
Package Repository
Use the Package Repository Menu on ThinMan to install the Elo Touch Driver on the ThinOX thin client.When you add the package to the Repository, select in the dialog box the "ThinOX Firmware" type and then browse to the Addon file.
You can execute the operation manually on a single device, or on multiple devices, but you can also use a Scheduled Activity or an Event Activity to install the Addon.
¶ Calibrate the monitor
Once the Addon is installed on the thin client, connect the Elo Touch Monitor and open the User Interface tab in the Control Panel window.
Applet missing? To see the applet in the Configuration Settings window be sure that the monitor is powered-on and connected to the device. If it is not connected and powered on, the applet is not visible in the User Interface tab.
Launch the calibration utility clicking the "Touch Screen Calibrate" applet.
Touch the calibrations points on the monitor (you will be asked to touch three calibration points in different positions on the monitor). After
this operation, the Elo Touch Screen monitor is calibrated and ready to be used.
¶ Supported Monitors
You can download the list of the Elo Touch Screen supported monitor at this link: ELO_Monitor_controller_2216_ 2701.pdf.
¶ How to verify that the driver is installed on the device
Open the Settings window and select the "Firmware" tab.
Click on "Get list..." button and verify that in the list appear the "Elotouch driver" package (the version could be different). If the package appears in the list, the driver is rightly installed.