This command allows to turn on, power off or reboot a specific device.
This command can be given to a selection of multiple devices.
Note
Power On command is done via a broadcast message (WOL - Wake On LAN). In some cases, when the network configuration or the routers or the switches are filtering and block broadcast messages, the command won't work (the WOL UDP Broadcast Packet is blocked or filtered).If the device is part of a group, ThinMan will also try to use the broadcast address for the network subnets defined using IP Ranges in the Network tree.
To maximize the probability to power-on the devices in the subnets.See also WOL - Relay