DO NOT USE USB 3.O PORT
The USB key generated by the Praim Toolkit is not compatible with USB 3.0 ports on Thin Clients. Always connect the key to a USB 2.0 port to ensure proper functionality.
WINDOWS EMBEDDED and USB 3.0 Ports
For Windows Embedded devices, we also recommend disconnecting any USB devices from USB 3.0 ports—leaving only the mouse and keyboard connected to USB 2.0 ports—during the restoration of a Windows image, until the process is fully completed.
NOT SUPPORTED USB KEY
This is a list of known unsupported USB key:
USB Verbatim PinStripe (USB 2.0) - Vid:18A5 - Pid:0302
Once the USB Key is prepared (see How to create Recovery USB Key for ThinOX or How to create Recovery USB Key for Windows Embedded or How to create an Upgrade BIOS USB Key for Praim thin client) you can use it on a thin client.
Follow the instructions below to boot from USB Key:
The thin client will reboot using the USB Key as boot device. This configuration is not saved in the BIOS, every time you need to boot from a USB device you will have to follow the above procedure.
Missing license code
The thin client will eventually ask for Numero di Serie (Serial Number) and Codice Licenza (License Code). Read Where can I find a device's license code? for more information.