USB Flash Drive: Size
Notice the drive should be at least 8 GB.
USB Flash Drive: Style
Please, consider that the USB key partition style must be MBR.To verify the partition style on Windows O.S. open the Disk Management window, select the disk you want to check, right-click it and select Properties. On the Volumes" tab, the Partition style attribute indicates whether is Master Boot Record (MBR) or GUID Partition Table (GPT).
¶ Create a Recovery USB Key for ThinOX
Insert a USB key storage.
Open the Praim Toolkit ThinOX USB Recovery.
Select the inserted USB Storage Key. If the key has more than one partition (as shown on the above image example) select one of them. Click on Format USB for Recovery. This process will format the USB key, it will remove any content/partition. The below warning message will appear.
Click on Yes and wait until the operation is finished and click on OK.
Once the USB has been formatted for Recovery (Type: PRAIM ThinOX USB Recovery), click on Next to continue.
Click on Add Firmware to insert the ThinOX firmware file (*.par). Download from MyPraim, the Praim Factory Firmware Image.
DO NOT REMOVE the USB key until the software finishes writing the firmware on the USB Storage Key.
Once the firmware is added, select as Model T9050.
Click on Finish. It will close the toolkit; then, you can extract the USB Key.
¶ Boot the Flexi from the USB Key
Boot the Flexi device from the USB Key, the recovery process will start immediately.
How long does it take to prepare a USB key
The preparation time of a USB key depends on the size of the image file and on the writing speed of the USB device. For more information see How long does it take to prepare a thin client using a USB Pen Drive? .