Page tree



Skip to end of metadata
Go to start of metadata

WES 7 ver. 3.2.0

Supported Models

Supported Models are:

  • C9700 (see note below)
  • A9700 (see note below)
  • U9700 (see note below)
  • A9074 (see note below)
  • U9074 (see note below)
  • D9074 (see note below)

See the note below for installation limits of this Firmware and Service Pack.

Important Note

Disk Space Limitation

Dear Customer,

Remember that from version 2.2.0 (see Release Notes WES 7 ver. 2.2.0 ) the firmware is available and can be used only on thin client with at least 8GB of DoM (Disk on Module) and with at least 2GB of free disk space on it.

The attempt to upgrade a device that does not meet the above conditions will produce a simple reboot of the device.

Citrix Receiver Connection in Agile Mode limitation

Currently the Agile Mode supports Citrix Farm based only on Citrix StoreFront or Web Interface.

For legacy farms, like XenApp 6.5 or XenDesktop 5.6 and previous, the connections to PNAgent Sites are not supported in Agile Mode.

E.g.: https://myfarm.company.com/Citrix/PNAgent/config.xml is not supported

E.g.: https://myfarm.company.com/Citrix/Store/PNAgent/config.xml is supported

Release Notes


Issue IDTypeFromDescription
TCSETTE-419Fix3.2.0A9700/U9700: front audio jack is not working correctly.
TCSETTE-418Fix3.2.0C9700: front audio jack is not working correctly.
TCSETTE-411Improvement3.2.0Power Options: Balanced power plan is set as default plan for the device.
TCSETTE-406News3.2.0Citrix Receiver: version 4.4.100 is installed in the image firmware file (no SP/HF).
TCSETTE-401News3.2.0VMware Horizon Client: version 4.1.0 is installed in the image firmware file (no SP/HF).
TCSETTE-360Fix3.2.0U9074: using the USB3 port in the back (near the COM port) with a mouse or keyboard the driver will not load and the attached device will not work.This problem can be solved upgrading the Citrix Receiver to version 4.4.1000 (see Citrix Release Notes http://docs.citrix.com/en-us/receiver/windows/4-4/receiver-windows-44-about/receiver-for-windows-4-4-fixed-issues.html ) or removing the Citrix Receiver (if not needed). (NO SP/HF)
TCSETTE-344Alert3.2.0In case you are restoring a Windows Embedded image using the Praim Toolkit you have to detach any USB device attached to USB 3.0 ports (e.g USB hub, mouse, mass storage key, etc.). Leave only the mouse and the keyboard attached on USB 2 ports until the process has completely finished. The problem resides in the sysprep phase of the Windows restoring. The problem colud be resolved using an image with the Citrix Receiver 4.4.1000 or without the Citrix Receiver.
TCSETTE-296Fix3.2.0EWF Indicator: in rare case the EWF indicator appears in the the tray bar.

Known Issues


Issue IDTypeDescription
TCSETTE-460FixAdding a Browser Connection with space character in the name produce an error when the configuration is saved.
TCSETTE-445FixThe Capture operation blocked around 5% of execution if the ThinMan port is configured differently from the default value (443).
TCSETTE-426FixA device under ThinMan Policy does not receive the device profile if it is rewritten using the Factory Firmware file.
TCSETTE-422FixError disabling "Agile Mode" on devices with Spanish language.
TCSETTE-372FixRAM memory full when many prints are executed on the local device with UWF filter enabled.
Workaround: use FBWF Write Filter and add the directory C:\WINDOWS\system32\spool to the write filter exceptions.
TCSETTE-299AlertHTML5 videos are not supported using Internet Explorer 11 (e.g. YouTube videos).
Workaround: install and use Flash Player to render videos.
TCSETTE-248FixFBWF Filter: using the FBWF filter do not allow to install Praim Language Service Pack to change the language user interface.
Work Around: before the installation of a Praim Language Service Pack disable the FBWF filter.
TCSETTE-199FixConnection Manager: using the same name for different types of connections will not correctly show them on the desktop.
TCSETTE-190FixIn a cloned device the background for a local user is not visualized correctly.
Workaround: use regedit tool, open the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background and set the value of OEMBackground of type DWORD32 to (1).
TCSETTE-127FixThe wallpaper is always showed in the Remote Assistance window even if it is disabled in the Praim Manager.

Known Issues Agile


Error rendering macro 'csv'

File '/var/atlassian/application-data/confluence/script/WikiAgile101KnownBugs.csv' not found.