Page tree



Skip to end of metadata
Go to start of metadata

ThinOX V10 ver. 10.3.5

Supported Models

Supported models are: 

  • A9054
  • U9054
  • D9054
  • N9052
  • N9152
  • E9154
  • H9154
  • D90-HOR, A90-HOR, U90-HOR, N90-HOR

  • D90-RFX, A90-RFX, U90-RFX, N90-RFX

  • D90-HDX, A90-HDX, U90-HDX, N90-HDX

  • T9050 (ThinOX4PC)

Important Notes

ThinOX 10.2.5 and Praim Toolkit 1.5.1

From ThinOX version 10.2.5 and higher, it is mandatory to use the Praim Toolkit version 1.5.1 to create USB Recovery Key.

IMPORTANT - Upgrading to this version needs ThinMan 7.5.x

The new format of the ThinOX firmware is installable and manageable by the ThinMan management software version 7.5.0 or higher.

Please download and update the ThinMan Server to the version 7.5.0 and afterward proceed with the upgrade of the Thin Clients.

The new format of ThinOX firmware is not installable by previous versions of ThinMan (e.g., ThinMan 7.4.x or 7.3.x).

READ CAREFULLY

IMPORTANT NOTE for ThinOX Ver. 10.1.1 
THE UPGRADE (from version 8.x or 9.x) WILL FORCE THE DEVICE TO FACTORY DEFAULT

Dear Customer,

This new version includes significant improvements and changes to the product. By performing this upgrade, the Thin Client will be forced to Factory Default.

This process will delete the previous configuration, and you will be asked to configure the device again.

Before starting the upgrade, please carefully read the FAQ section and the related firmware information available at the following link:

IMPORTANT - Upgrade to 10.0.x from older firmware version

Note about Energy Star 6.1

Note that with the new Energy Star 6.1 compliance a factory default device will enter the "Suspend" mode after 30 minutes of inactivity. You can change this behavior using the "Power Management" applet in the "Control Panel" (link: Power Management).

Release Notes


Issue IDTypeFromDescription
TCTX-2569Fix10.3.5Citrix Receiver: USB CD Reader is not exported correctly if the disk is missing.
TCTX-2565Fix10.3.5Citrix Receiver configured as "Praim Desktop Client" does not correctly pass the pre-filled domain when "hidden".
TCTX-2561Fix10.3.5The Citrix notifications icon disappear from the taskbar when the device is locked.
TCTX-2540Fix10.3.5Sometimes the ThinMan Video Configurator crashes.
TCTX-2534Fix10.3.5Video Resolution: a specific video resolution set on the device (e.g. not "Auto") is not preserved when upgrading to 10.3.3.
TCTX-2532Improvement10.3.5Imprivata: support for "RF IDeas" readers.
TCTX-2530Fix10.3.5ICA Global Settings: the configurator is not present in the Control Panel after an upgrade if the old selected Citrix Receiver version is not available in the new firmware.
TCTX-2527Fix10.3.5N9052: the output volume can be configured at maximum to 52/100.
TCTX-2526Improvement10.3.5Citrix Receiver: version 13.10.0 is added to the available client. You can select it from the "ICA Global Settings" applet in the Control Panel.
TCTX-2525Fix10.3.5When pressing the power button with an opened VMware session, the shutdown dialog does not appear on the top.
TCTX-2523Fix10.3.5The Logitech K330 cordless devices are not working correctly.
TCTX-2522Fix10.3.5The microphone on the jack port is not working correctly.
TCTX-2520News10.3.5Browser Connection: in the connection configuration you can select to delete the downloaded files at the end of the browser session.
TCTX-2519Fix10.3.5Browser Connection: in the connection configuration, you can select to open an incognito window for the browser.
TCTX-2499Improvement10.3.5Bluetooth configurator for HID devices.
TCTX-2483Fix10.3.5Citrix Receiver with ICA Global Setting configured using version 12: the second time the autostarting connection is not started automatically.
TCTX-2095Fix10.3.5VMware Connection: in rare cases, the "Remember username" parameter does not work correctly.

Known Issues

Change password on RDP with NLA Authentication

RDP with NLA does not support the change password when it is expired. It cannot be solved. See more information on How to manage the change password request on RDP protocol with NLA authentication.

UNSUPPORTED PERIPHERALS

A list of unsupported peripherals for ThinOX 10 O.S.:

  • BusinessKey INFOCERT (Realtek Semiconductor Corp.) with Vid:0bda Pid:0169
  • SISS cards are not supported on KUS0916 keyboard


Issue IDTypeDescription
TCTX-2765 Actually the Client Citrix doesn't export successfully in the remote session Samsung Smartphone USB mass storage.
TCTX-2762 A desktop background change carried out on ThinMan offline configuration or template, doesn't result when deployed to the Thin Client.
Workaround: you have at least once to operate straight on one thin client, even through a remote connection. Then, change the desktop image and then overwrite the offline configuration or template by ThinMan console.
TCTX-2595FixCitrix Connection: issue on the USB Redirection when trying to use a file whose name includes some special characters like "ö", "ü", "ä".
TCTX-2588FixThinMan VMware Redirection panel crash when trying to open an exception.
TCTX-2586 Using VMware Horizon view client trough RDP protocol, pressing ESC you will switch from full screen mode to windows mode.
TCTX-2567FixFirefox Connection: "CTRL + Q" hotkey combination to close the session does not work.
TCTX-2535FixVXME Addon: the configurator is not visible in the Control Panel.
TCTX-2517FixWhen the Remote Assistance session starts, it disables the NumLock status.
TCTX-2505FixCopy and paste are not working between two different RDP sessions.
TCTX-2502FixVMware Connection: in rare cases, the VMware connection using the RDP protocol fails without returning an error.
TCTX-2501FixAudio Volume Configurator: the volume set into the ThinMan Offline configurator is not correctly assigned to the devices using the manual way or the profile manager.
TCTX-2488FixA9054, U9054: with some monitors, the 800x600 graphics resolution is not supported.
TCTX-2485FixRDP Connection 8.1: if the connection is configured to use TLS if available (and the TLS is not available on the server-side), when it starts it produces an error.
TCTX-2404FixVideo Configurator: the Offline Configurator for the Video Properties does not save the configured video resolution correctly.
TCTX-1788FixC9050: VESA Video modality is not working correctly (do not show the desktop).
Workaround: use ThinMan "Configuration -> Receive", then modify the VESA configuration and use "Configuration -> Send" to reconfigure the device.
TCTX-1611FixIn some cases "Ctrl + F4" do not close the Citrix Receiver Web Connection.
TCTX-1593FixThe Smart Card Reader model miniLECTOR 38 PR by Bit4id (Vid:0BDA, Pid:0169) is not currently supported.
TCTX-866FixPraim Emulator: switch session button are not working correctly.
TCTX-862FixCitrix receiver: switching from "Legacy" Receiver to 13.x will lost configuration of dual monitor.
Workaround: execute a factory reset of the device and re-create the Citrix Connection.
TCTX-857FixU9050: the dual monitor configuration with Primary monitor connected to DVI-I and secondary monitor connected on VGA is not working correctly.
Workaround: user Primary monitor on VGA and Secondary monitor on DVI-I.
TCTX-837FixRDWeb App: when configuring a RemoteApp, the mouse focus is displaced in all applications.
TCTX-836FixRDWeb: credentials are requested every time a new app is launched.
TCTX-801FixShell Connection: the Shell connection is empty when applied to a device using the Profile Manager.
Workaround: use the manual configuration to send Shell connections.
TCTX-793FixU9200 with multimonitor and Citrix Receiver configured with only one monitor: the connection starts but is not usable.
TCTX-745FixVMware connection with RDP Protocol: the Large Screen property is not working correctly (the desktop is visualized in the center of the screen without window frame).
TCTX-724FixCitrix Receiver PNAgent: ending the connection with the Connections Manager will not close the session.
TCTX-662FixCitrix Receiver (PNAgent) with Published Desktop in "Stretched" multimonitor modality: the Desktop will occupy only the first monitor and the taskbar is present.
TCTX-659FixVMware Horizon View with RDP protocol on Windows 8 Virtual Desktop: the MMR feature is not working correctly.
TCTX-653AlertThe Citrix Receiver using the Self Service User Interface (SSUI) cannot be closed in full-screen mode.
Workaround: reboot the thin client to close the connection or use the ThinMan Console to modify the thin client configuration.
TCTX-649FixWBT User Interface with shortcut switcher "wbt mode": when using a RDP connection (protocol ver. 7) the hotkey CTRL + ALT + "home" or "UpArrow" or "DownArrow" does not switch between the sessions.
Workaround: use RDP protocol ver. 8.
TCTX-618FixVMware Horizon View with RDP protocol and dual monitor configuration is not working correctly.
TCTX-589AlertRDP8 in fullscreen multi monitor: is not working correctly with monitors with different resolutions.
Workaround: use the same resolution on both monitors.
TCTX-533FixC9010, C9050, C9200: using RDP8 RemoteFX on Server 2008 R2 can produce unexpected results when scrolling down large page of selected data (e.g. selection of 200 cells in MS Excel will not stop the scrolling).
TCTX-360FixThinMan Offline Configuration: the CUPS printer "Generic - Generic Text only" is not available in the printer setup configurator.
TCTX-176FixThe local Slovenian Keyboard Layout miss some character ('s', 'c', 'd', 'z' with caron and diacritic). When the connection is established, the layout is working correctly in the remote desktop/application.
TCTX-95AlertCitrix Receiver: Delphi written applications once minimized cannot be restored. It is a Citrix known limit.
Workaround: do not minimize application written in Delphi.
TCTX-94FixXenApp Agent: moving the window of a Delphi application causes the minimization of the window itself.

Details of this version

OS Details


Operating SystemThinOX
Type32 bit
Version10.3.5
Protocol & Clients
Citrix Receiver13.10.0
Citrix Receiver13.4.2
Citrix Receiver12.1.8

HDX RealTime Optimization Pack for Microsoft Lync 2010 (x86)

1.6

HDX RealTime Optimization Pack for Microsoft Lync 2013 (x86)

1.7

HDX RealTime Optimization Pack for Microsoft Lync 2013 (x86)

2.0.100

HDX RealTime Optimization Pack for Microsoft Skype for Business 2015 (x86)

2.0.100

HDX RealTime Optimization Pack

2.2

HDX RealTime Optimization Pack

2.3

HDX RealTime Optimization Pack

2.4 (default on vertical modes)
ThinPrint7.0.163.1
VMware Horizon View Client (RDP/PCoIP)4.8.0
Microsoft RDSFreeRDP 1.0.3/FreeRDP 1.2
RDP protocolRDP 7.1
RDP protocolRDP 8.1
RemoteFXYes
Software
Browser Firefox 38.0
Emulator Praim TN5250E / 3270 Video/Printer

-

Emulator Praim VT/ASCII -
PDF ViewerEvince 3.4.0
Microsoft .NET Framework  -
Media PlayerTotem 3.0.1
E-mail client-
JVM/JRE1.8.0
Adobe Flash Player

11.2.202

Skype-
VNC Client4.1.1
IKE Shrew Soft (Cisco VPN)2.2.1
Open VPN Client2.3.2
Dell SonicWall Netextender8.0.784
X11 ClientX Server 1.15.1
PCSC1.8.14

OpenJDK

-
SNMP5.4.3
GStreamer0.10
Shell scriptbash 4.2.24
Printer support

CUPS v. 1.5.2

LPD/LPR e RAWlpserver 1.1.6
Emulator IBM AS400java client 1.1.4
WPA_Supplicant2.6
Putty0.62-6
Factory Options
Praim Multimedia codecs1.28.1
WiFi IEEE 802.11 a/b/g/nDNXA-116
WiFi IEEE 802.11 a/b/g/n/acIntel 3160 AC