Page tree



Skip to end of metadata
Go to start of metadata

ThinOX V10 ver. 10.1.2

Supported Models

Supported models are: 

  • A9054
  • U9054
  • D9054
  • A9050
  • U9050
  • U9200
  • C9200
  • C9050
  • C9010
  • D90-HOR, A90-HOR, U90-HOR, N90-HOR

  • D90-RFX, A90-RFX, U90-RFX, N90-RFX

  • D90-HDX, A90-HDX, U90-HDX, N90-HDX

Important Notes

IMPORTANT - Upgrading to this version needs ThinMan 7.5.x

The new format of the ThinOX firmware is installable and manageable by the ThinMan management software version 7.5.0 or higher.

Please download and update the ThinMan Server to the version 7.5.0 and afterwards proceed with upgrade of the Thin Clients.

The new format of ThinOX firmware is not installable by previous versions of ThinMan (e.g. ThinMan 7.4.x or 7.3.x).

READ CAREFULLY

IMPORTANT NOTE for ThinOX Ver. 10.1.1 
THE UPGRADE (from version 8.x or 9.x) WILL FORCE THE DEVICE TO FACTORY DEFAULT

Dear Customer,

This new version includes significant improvements and changes to the product. By performing this upgrade the Thin Client will be forced to Factory Default.

This process will delete the previous configuration and you will be asked to configure the device again.

Before starting the upgrade, please read carefully the FAQ section and the related firmware information available at the following link:

IMPORTANT - Upgrade to 10.0.x from older firmware version

Note about Energy Star 6.1

Note that with the new Energy Star 6.1 compliance a factory default device will enter the "Suspend" mode after 30 minutes of inactivity. You can change this behavior using the "Power Management" applet in the "Control Panel" (link: Power Management).


Release Notes


Issue IDTypeFromDescription
TCTX-1497Fix10.1.2After an upgrade and in some cases the Remote Assistance from ThinMan is not working.
TCTX-1485Fix10.12Time: it is possible to change the time of the device even if it is password protected.
TCTX-1345Improvement10.1.2XenApp Agent connection is not available in the Control Panel anymore but can be created using a Citrix Receiver connection.
TCTX-1341Improvement10.1.2VMware Horion View Client is upgraded to version 4.1.
TCTX-1340Fix10.1.2Citrix Receiver: using forcing Legacy Client there are problems with certificates.
TCTX-1276Fix10.1.2RDP 8.1: "Ctrl+Alt+F1" hotkey not working in Microsoft Dynamics Navision 2013.
TCTX-1245Fix10.1.2IBM iSeries Access: error MSGGEN048 license expired.
TCTX-1217Fix10.1.2VMware Horizon: Microphone inserted in jack input has low level of volume, USB microphone has volume set to 0.
TCTX-1145Fix10.1.2Citrix Optimization Pack on C9050/C9200/C9010: bad audio quality with headphone/speaker connect to the frontal jack with Skype for Business.
TCTX-1108Fix10.1.2Using a Citrix Receiver Web connection and a Firefox connection when the Firefox connection is started it ask to choose a Firefox profile.
TCTX-1082Fix10.1.2Local PDF Reader cannot print because printers are not detected.
TCTX-1064Fix10.1.2XenApp Agent: when configured pointing to a Netscaler the credential are requested twice the first time.
TCTX-1063Fix10.1.2IBM iSeries Access: if the configuration of the device is read from the ThinMan immediately after its creation, then the configuration is not working correctly when saved on template file or profile.
TCTX-880Fix10.1.2Citrix Web Connection fullscreen and Dual Monitor: the connection starts maximized and not in fullscreen mode.
TCTX-870Improvement10.1.2Citrix Receiver: is upgraded to version 13.3.
TCTX-390Improvement10.1.2VMware Horizon View Client: ability to propose the last username/domain inserted.
TCTX-45Improvement10.1.2VMware Horizon Connection: allowed to send the CTRL+ALT+DEL hotkey combination to the Virtual Desktop.

Known Issues

Change password on RDP with NLA Authentication

RDP with NLA does not support the change password when it is expired. It cannot be solved. See more information on How to manage the change password request on RDP protocol with NLA authentication.

UNSUPPORTED PERIPHERALS

A list of unsupported peripherals for ThinOX 10 O.S.:

  • BusinessKeyINFOCERT(Realtek Semiconductor Corp.) with Vid:0bda Pid:0169
  • SISS cards are not supported on KUS0916 keyboard


Issue IDTypeDescription
TCTX-1578FixWith ThinMan Login enabled and Citrix Receiver PNAgent connection the update from ThinMan is not working correctly.
TCTX-1544FixVMware Analog Audio does not work correctly.
TCTX-1538FixCitrix USB Redirection rules are not applied correctly.
TCTX-1537AlertCompact Model: the external or internal Wi-Fi adaptor 802.11 b/g configured to use WPA Mixed Mode is not working correctly.
TCTX-1528FixA9054: RDP session with dual monitor and disabled RFX flag in some cases will produce an Out of Memory error.
TCTX-1503ImprovementRDP Protocol: some general improvement on RDP Protocol.
TCTX-1113FixDuring Remote Assistance session the power off window (the one with the power management buttons) is not shown.
TCTX-1111FixDual Monitor: with Primary set on DVI-2/VGA and fixed resolution (not Autodetect), the Secondary will set the same resolution of the Primary.
TCTX-1024AlertRDP: the connection to a virtual machine Windows 10 using the RDP 8 protocol is not syncing correctly the Num Lock led on the keyboard.
Solution: to solve this limit enable the "Thin Client Mode" parameter on the RDP 8 Global Settings.
TCTX-866FixPraim Emulator: switch session button are not working correctly.
TCTX-862FixCitrix receiver: switching from "Legacy" Receiver to 13.x will lost configuration of dual monitor.
Workaround: execute a factory reset of the device and re-create the Citrix Connection.
TCTX-857FixU9050: the dual monitor configuration with Primary monitor connected to DVI-I and secondary monitor connected on VGA is not working correctly.
Workaround: user Primary monitor on VGA and Secondary monitor on DVI-I.
TCTX-837FixRDWeb App: when configuring a RemoteApp, the mouse focus is displaced in all applications.
TCTX-836FixRDWeb: credentials are requested every time a new app is launched.
TCTX-801FixShell Connection: the Shell connection is empty when applied to a device using the Profile Manager.
Workaround: use the manual configuration to send Shell connections.
TCTX-793FixU9200 with multimonitor and Citrix Receiver configured with only one monitor: the connection starts but is not usable.
TCTX-745FixVMware connection with RDP Protocol: the Large Screen property is not working correctly (the desktop is visualized in the center of the screen without window frame).
TCTX-724FixCitrix Receiver PNAgent: ending the connection with the Connections Manager will not close the session.
TCTX-662FixCitrix Receiver (PNAgent) with Published Desktop in "Stretched" multimonitor modality: the Desktop will occupy only the first monitor and the taskbar is present.
TCTX-659FixVMware Horizon View with RDP protocol on Windows 8 Virtual Desktop: the MMR feature is not working correctly.
TCTX-653AlertThe Citrix Receiver using the Self Service User Interface (SSUI) cannot be closed in full-screen mode.
Workaround: reboot the thin client to close the connection or use the ThinMan Console to modify the thin client configuration.
TCTX-649FixWBT User Interface with shortcut switcher "wbt mode": when using a RDP connection (protocol ver. 7) the hotkey CTRL + ALT + "home" or "UpArrow" or "DownArrow" does not switch between the sessions.
Workaround: use RDP protocol ver. 8.
TCTX-618FixVMware Horizon View with RDP protocol and dual monitor configuration is not working correctly.
TCTX-616AlertThe VMware connection to Horizon View ver. 5.x could have some visualization problem.
TCTX-589AlertRDP8 in fullscreen multi monitor: is not working correctly with monitors with different resolutions.
Workaround: use the same resolution on both monitors.
TCTX-576FixRemote Assistance: when a RDP Connection ver. 7 is active, some keys are not working (e.g. "(" ).
TCTX-533FixC9010, C9050, C9200: using RDP8 RemoteFX on Server 2008 R2 can produce unexpected results when scrolling down large page of selected data (e.g. selection of 200 cells in MS Excel will not stop the scrolling).
TCTX-360FixThinMan Offline Configuration: the CUPS printer "Generic - Generic Text only" is not available in the printer setup configurator.
TCTX-176FixThe local Slovenian Keyboard Layout miss some character ('s', 'c', 'd', 'z' with caron and diacritic). When the connection is established, the layout is working correctly in the remote desktop/application.
TCTX-95AlertCitrix Receiver: Delphi written applications once minimized cannot be restored. It is a Citrix known limit.
Workaround: do not minimize application written in Delphi.
TCTX-94FixXenApp Agent: moving the window of a Delphi application causes the minimization of the window itself.
TCTX-46FixNetwork Configuration: Network and Broadcast parameters are maintained when switching from Static IP to DHCP configuraton mode.