ThinOX V10 ver. 10.0.1
Supported models are:
IMPORTANT NOTE for ThinOX Ver. 10.0.1
THIS UPGRADE WILL FORCE THE DEVICE TO FACTORY DEFAULT
This new version includes significant improvements and changes to the product. By performing this upgrade the Thin Client will be forced to Factory Default.
This process will delete the previous configuration and you will be asked to configure the device again.
Before starting the upgrade, please read carefully the FAQ section and the related firmware information available at the following link:
|TCTX-578||News||10.0.1||Added "IBM i Access Client" for 5250 sessions.|
|TCTX-537||Improvement||10.0.1||RDP Protocol ver. 8.1 is the default for "RDP Global Settings" in the "Control Panel".|
|TCTX-480||Fix||10.0.1||(I9010) ThinMan User Interface: Citrix HDX USB Redirection Exception List window is not shown correctly when edited on the ThinMan Server (there are not gui control to close the window).|
|TCTX-464||Improvement||10.0.1||Flash Player is upgraded to ver. 184.108.40.2061.|
|TCTX-425||Improvement||10.0.1||New applet "Certification Manager" in Control Panel that allows to import certificates for all the available connections.|
|TCTX-424||Improvement||10.0.1||Redesign for the "RDP Global Setting" applet in "Control Panel". Every RDP connection on the thin client will use the parameters defined in the "RDP Global Settings".|
|TCTX-423||News||10.0.1||Support for RDP Protocol ver. 8.1.|
|TCTX-417||Fix||10.0.1||Aruba Key is not working correctly.|
|TCTX-412||News||10.0.1||VMware Horizon Client: upgrade to version 3.4.|
|TCTX-350||Fix||10.0.1||Citrix XenD via Web connection: with multimonitor when the user logoff, the Firefox title-bar appears.|
|TCTX-330||Fix||10.0.0||Citrix Receiver based on Web: the browser does not maintain the exception for site without certificates.|
|TCTX-242||News||10.0.1||Citrix Receiver: Self Service User Interface is available.|
|TCTX-205||Improvement||10.0.1||The label for the "Terminal Modality" applet is changed in "User Interface".|
|TCTX-74||Fix||10.0.1||Sometimes the USB headphone is not working properly even if it is enabled and configured.|
A list of unsupported peripherals for ThinOX 10 O.S.:
- BusinessKeyINFOCERT(Realtek Semiconductor Corp.) with Vid:0bda Pid:0169
- SISS cards are not supported on KUS0916 keyboard
|TCTX-1285||Fix||When the Control Panel is opened using the Offline Configuration in ThinMan, the "Network File System" applet is missing.|
|TCTX-694||Fix||When "Deny Connection Changes" parameter is enabled the user can still create new connections.|
|TCTX-692||Fix||IBM iAccess: Startup Options are not working.|
|TCTX-687||Fix||VMware View Client: in some cases the VMware Connection disconnects itself after few minutes of usage.|
|TCTX-675||Fix||IBM Client Access: shows the EULA every time the thin client is rebooted.|
|TCTX-662||Fix||Citrix Receiver (PNAgent) with Published Desktop in "Stretched" multimonitor modality: the Desktop will occupy only the first monitor and the taskbar is present.|
|TCTX-659||Fix||VMware Horizon View with RDP protocol on Windows 8 Virtual Desktop: the MMR feature is not working correctly.|
|TCTX-653||Alert||The Citrix Receiver using the Self Service User Interface (SSUI) cannot be closed in full-screen mode.
Workaround: reboot the thin client to close the connection or use the ThinMan Console to modify the thin client configuration.
|TCTX-649||Fix||WBT User Interface with shortcut switcher "wbt mode": when using a RDP connection (protocol ver. 7) the hotkey CTRL + ALT + "home" or "UpArrow" or "DownArrow" does not switch between the sessions.
Workaround: use RDP protocol ver. 8.
|TCTX-646||Fix||The Remote Assistance Accept/Reject dialog box is not shown when a Citrix connection is active (the request dialog box is shown under the Citrix connection).|
|TCTX-618||Fix||VMware Horizon View with RDP protocol and dual monitor configuration is not working correctly.|
|TCTX-616||Alert||The VMware connection to Horizon View ver. 5.x could have some visualization problem.|
|TCTX-614||Fix||RDP Connection: in some cases the USB microphone is not correctly recognized from the virtual desktop.|
|TCTX-610||Fix||Printers: trying to print a test page with USB printer produce an error.|
|TCTX-599||Alert||Limit: the IBM Terminal configuration applet is not present on the ThinMan Console.|
Workaround: setup the IBM Terminal configuration on the thin client, then read it from the ThinMan Console and save it as Profile or Template.
|TCTX-589||Alert||RDP8 in fullscreen multi monitor: is not working correctly with monitors with different resolutions.
Workaround: use the same resolution on both monitors.
|TCTX-576||Fix||Remote Assistance: when a RDP Connection ver. 7 is active, some keys are not working (e.g. "(" ).|
|TCTX-533||Fix||C9010, C9050, C9200: using RDP8 RemoteFX on Server 2008 R2 can produce unexpected results when scrolling down large page of selected data (e.g. selection of 200 cells in MS Excel will not stop the scrolling).|
|TCTX-474||Fix||VMware USB Redirection applet: the GUI crash when an exception with empty Vendor Class is added.|
|TCTX-360||Fix||ThinMan Offline Configuration: the CUPS printer "Generic - Generic Text only" is not available in the printer setup configurator.|
|TCTX-291||Fix||Dual Monitor: Applying a ThinMan Device Policy when the "Maintain Video Resolution" parameter is enabled, will corrupt the second monitor video resolution and the thin client starts with errors.|
Workaround: do NOT enable the "Maintain Video Resolution" parameter on the ThinMan Policy for thin client configured with dual monitor.
|TCTX-256||Fix||Citrix Receiver: using PNAgent site does not allow to change password on its expiration.|
Workaround: use the Citrix Receiver with Web Interface.
|TCTX-176||Fix||The local Slovenian Keyboard Layout miss some character ('s', 'c', 'd', 'z' with caron and diacritic). When the connection is established, the layout is working correctly in the remote desktop/application.|
|TCTX-142||Fix||Citrix Receiver PNAgent: a published application will be opened in a windows even if on the server it is configured to run fullscreen. If the application is a Desktop the problem is not shown.|
Workaround: use the Citrix Receiver with Web Interface.
|TCTX-139||Fix||XenApp Plugin (ICA Client): TCP browsing does not show all the published applications.|
Workaround: use HTTP browsing.
|TCTX-130||Fix||RDP Client: using RDP7 protocol with TLS encryption level with the farm using "RDP security level", the dual monitor is not working correctly.|
Workaround: set the farm to "Negotiation" security level.
|TCTX-112||Fix||Citrix Receiver PNAgent: Advanced Options - autostart options has to be intended for both Desktops and Applications. Labels has to be changed.|
|TCTX-95||Alert||Citrix Receiver: Delphi written applications once minimized cannot be restored. It is a Citrix known limit.
Workaround: do not minimize application written in Delphi.
|TCTX-94||Fix||XenApp Agent: moving the window of a Delphi application causes the minimization of the window itself.|