Page tree

Skip to end of metadata
Go to start of metadata

Praim Toolkit ver. 1.5.2

Supported Thin Client Models

This version of Praim Toolkit supports these thin client models:

  • XT900-I, XT920-I, XT901-I

  • XT9000-I XT9200-I, XP9400-I, WE9700-I

  • XT9000-C, XT9200-C, XP9400-C, WE9700-C

  • XT9000-U, XT9200-U, XP9400-U, WE9700-U

  • XT9050-A, XP9400-A, WE9700-A

  • XT9050-TC180, XT9200-TC180

  • BT9000

  • C9010, C9050, C9200, C9400, C9700, C9080

  • A9050, A9700
  • U9050, U9200, U9700, U90-HDX, U90-RFX, U90-HOR
  • A9054, A9074, A9084, A90-HDX, A90-RFX, A90-HOR
  • U9054, U9074, U9084
  • D9054, D9074, D9084, D90-HDX, D90-RFX, D90-HOR
  • N9012, N9052, N9072, N90-HDX, N90-RFX, N90-HOR
  • A9014
  • U9014
  • D9014


 ATTENTION: It is mandatory to use this version of Toolkit to create USB Recovery Key for ThinOX version 10.2.5 and greater.


For Windows 10 IoT thin client models use this version or newer to restore or clone image firmware (e.g. N9012, A9014, U9014 and D9014).

DO NOT USE USB 3.0 PORT FOR MODEL U9050, U9200, U9080, U9700

Do not use the key generated by the Toolkit on thin client models U9050, U9200, U9080, U9700 on USB 3.0 ports. The USB key generated by the Praim Toolkit is not working using USB 3.0 ports on the thin client models U9050, U9200, U9080, U9700; in this case use only USB 2.0 ports.

NOT Supported Thin Client Models

These old models are NOT supported: INO-840, XP-6600, XP-6700.

Release Notes

Issue IDTypeFromDescription
TCTK-164Fix1.5.2ThinOX Firmware version 10.2.5 is not correctly managed.
TCTK-159Improvement1.5.1Added boot image version 1.0.6. It will solve some bug and improve features.
TCTK-158Fix1.5.1A version of the USB Key created by an old version of Toolkit software is not recognized correctly.
TCTK-152Improvement1.5.1About: added links to documentation (wiki) and release notes.