Page tree

Skip to end of metadata
Go to start of metadata

Praim Toolkit ver. 1.5.0

Supported Thin Client Models

This version of Praim Toolkit supports these thin client models:

  • XT900-I, XT920-I, XT901-I,

  • XT9000-I XT9200-I, XP9400-I, WE9700-I

  • XT9000-C, XT9200-C, XP9400-C, WE9700-C

  • XT9000-U, XT9200-U, XP9400-U, WE9700-U

  • XT9050-A, XP9400-A, WE9700-A

  • XT9050-TC180, XT9200-TC180,

  • BT9000,

  • C9010, C9050, C9200, C9400, C9700, C9080

  • A9050, A9700
  • U9050, U9200, U9700, U90-HDX, U90-RFX, U90-HOR
  • A9054, A9074, A9084, , A90-HDX, A90-RFX, A90-HOR
  • U9054, U9074, U9084
  • D9054, D9074, D9084, D90-HDX, D90-RFX, D90-HOR
  • N9012, N9052, N9072, N90-HDX, N90-RFX, N90-HOR
  • A9014
  • U9014
  • D9014


For Windows 10 IoT thin client models use this version or newer to restore or clone image firmware (e.g. N9012, A9014, U9014 and D9014).

DO NOT USE USB 3.0 PORT FOR MODEL U9050, U9200, U9080, U9700

Do not use the key generated by the Toolkit on thin client models U9050, U9200, U9080, U9700 on USB 3.0 ports. The USB key generated by the Praim Toolkit is not working using USB 3.0 ports on the thin client models U9050, U9200, U9080, U9700; in this case use only USB 2.0 ports.

NOT Supported Thin Client Models

These old models are NOT supported: INO-840, XP-6600, XP-6700.

Release Notes

Issue IDTypeFromDescription
TCTK-155Improvement1.5.0Check and update for USB drive formatted with old version of Toolkit.
TCTK-154News1.5.0Support for Win 10 IoT image firmware (N9012, A9014, U9014 and D9014 thin client models).