Page tree

 

Praim ThinMan Latest – This documentation is related to "Praim ThinMan" software version 7.8.16.
For documentation on a former version of Praim ThinMan or for other software documentation, see Wiki Praim.

 

Skip to end of metadata
Go to start of metadata

Ports for XP Embedded

ThinMan uses specific network ports to communicate with remote devices. When remote devices are behind either a firewall or a router, it may be necessary to configure those ports for ThinMan to get access to the remote devices. The following table describes the ports used by ThinMan (Incoming Ports are those listened by ThinMan software, Outgoing Ports are those connected on devices by ThinMan software).

The ports must be open on the operating system firewall or on the network firewall.

NOTE: Incoming and Outgoing Ports

 

Incoming Ports: ThinMan <---- Devices

Outgoing Ports: ThinMan ----> Devices

Incoming Ports

Port 
Type

Port
Number

Service or 
Process

Description

TCP21ThinManServerThis port is used for the older versions of ThinOX thin client or for Teradici thin client. ThinMan reserves this port to accept connection from them.
UDP66, 67, 69, 4011VariousUsed by DHCP Relay, TFTP and PXE Service.
UDP/TCP1680ThinManSupport

UDP/TCP Notify from Thin Client and Devices Browsing

TCP5400, 5500VNCviewerultra.exeRemote Assistance
TCP20080ThinManServer

HTTP Server for Firmware Upgrading

Outgoing Ports

Port
Type

Port
Number

Description

UDP/TCP1683For Thin Client administration
TCP21To remote FTP Services
TCP5800, 5900To Remote Assistance Thin Client
TCP443To contact Praim servers on Internet for demo licenses request
TCP80

To download from Praim servers on Internet the upgrades for the Device Images (see Device Images Manager Menu)