In this window it is possible to configure the parameters that define the used proximity card workflow.
"Lock Endpoint at Proximity Card Remove" and "Lock Endpoint at Proximity Card Tapping" specify to lock the thin client on card removing or on card tapping.
If you select "Card Tapping" you may specify when the tap event is recognized:
- "Tap Event on Card Plug" consider the tap event the moment when the card is plugged in or leans on the reader
- "Tap Event on Card Quick Remove" means that the tap event is considered when the card leans on or plug in the player and after a short time it is removed. The tap event occurs at the card removing event.
- In this case you have to indicate what is the time interval in milliseconds, at "Maximum card plug/remove interval" option, in which the two event (plug and remove) must succeed in order to consider a tapping event. If the removing of the card is done after this interval nothing happens. This option is useful when software installed on the Virtual Desktop want use information stored on card (e.g. digital signing, strong authentication, ….).
The "Single TAP user switch" parameter allows the agent, if flagged, to switch user and start its session with a single tap from the user.
The "Ask PIN/Password on same user unlock tapping" parameter allows a user, if not flagged, to access the locked screen without the needs to digit the PIN or the Password (it is valid only for locked desktop on the same thin client, e.g. a desktop locked by a tap or a desktop locked because screen saver starts).